The New Benchmark for Air Quality Research
The Zenmuse P1 integrates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized Gimbal mount. Designed for photogrammetric flight missions, the Zenmuse P1 gimbal camera takes efficiency and accuracy to a whole new level.
Key Features at a Glance
- DJI Skyport Mount
- Camera: Full Frame
- 45MP
- Lenses: DJI DL 24mm, 35mm, 50mm
- SD card with a UHS-1 rating or higher, up to 128 GB
- Image file: 3:2 – 8192 x 5460 pixels
- Minimum photo interval: 0.7 sec
- Mechanical shutter: 1/2000 – 1/8 sec
- Electronic shutter: 1/8000 – 8 sec
- Aperture: f/2.8 – f/16
- ISO range: Photo: 100–25,600, video: 100–3,200
- Dimensions: 198 x 166 x 129 mm
- Weight: +/- 787 g
- Power consumption: 13 W
- IP rating: IP4x
- Operating temperature: -20° to 50°C
- Storage temperature: -20° to 60°C
- Absolute accuracy: Horizontal: 3 cm, Vertical: 5 cm
- Smart Oblique Capture System
- Timesync 2.0 (synchronizes the Camera, flight controller, RTK, and Gimbal at the microsecond level)
Your go-to tool for aerial photogrammetry
Full-frame camera
Multiple lenses are possible
Use DJI DL-mount lenses with focal lengths of 24, 35, or 50 mm
Smart Angled Shot
Cover up to 7.5 km² in a single workday with the DJI Zenmuse P1. Increase the efficiency of your oblique photography mission (take your photos at an angle <> 90° while flying) using Smart Oblique Capture, in which the Gimbal mount automatically rotates to take photos from the various required angles. At the edge of the flight area, only photos essential for reconstruction are captured, thereby increasing post-processing efficiency by 20% [5] to 50% [6].
Smart Data Management
Your mission data management—streamlined.
Fieldwork Report
Check the data quality immediately after the flight by verifying the position data and the number of images captured, as well as the RTK status and positioning accuracy.
Application Scenarios
